380V Intelligent Electric Actuated Weldable Wc6 Gate Valve for Power Plant Use

• Customization: Available
• Media: Gas
• Temperature: High Temperature
• Model NO.: Z941H
• Type: Straight-through
• Material: Carbon Steel
• Connection Form: Weldable
• Pressure: High Temperature
• Actuator: Electric
• Seal Surface: Wedge Gate Valve
• Thread Position of Valve Rod: Outside Gate Valve
• Usage: Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
• Standard: GB/DIN/ANSI/JIS
• Application: Industrial Usage
• Color: Support Customization
• Painting: Epoxy Painting
• Used in: Petrochemical Industry, Water Supply,Power Industr
• Transport Package: Wooden Box
• Trademark: YUHONG/OEM
• Origin: Zibo

Product Description

Application Scenarios
Widely used in:

·Petrochemical Industry: Crude oil transportation, distillation column control, acid-base medium adjustment
·Water Supply and Drainage Engineering: Waterworks pipeline regulation, aeration systems in sewage treatment plants
·Heating and Heating: Steam pipeline flow control, heat exchanger station temperature regulation
·Power Industry: Boiler feed water systems, circulating water pipeline switching control
·Metallurgy and Mining: Slurry transportation pipelines, dust removal system air volume adjustment

Technical Parameters

Item	Parameter Range	Remarks
Model	Z41H	WCB,WC6,LCB,CF8M,CF8,CF3,CF3M,...
Nominal Diameter	DN25- DN1200	Customized extra-large diameters of DN1400 - DN2000 are supported
Driving Method	Electric (AC220V/380V, DC24V)	Explosion-proof type (Ex d ⅡC T6 certification) is optional
Connection Method	Welded	Flange type/welded type can be customized
Sealing Form	Metal hard seal
Operating Temperature	-40℃ - 540℃ (depending on material)	Low-temperature type supports -196℃ cryogenic environment
Control Method	Remote control/local switch/manual emergency	Standard RS485 communication interface (Modbus protocol)

Product Features

1.Triple Sealing Design
·Valve seat: Adopts a self-tightening sealing structure, with stronger sealing performance under higher pressure, and the leakage rate ≤ 0.01%.
·Valve stem: Double protection with V-shaped packing and O-ring seals to prevent medium leakage.
·Shell: Precision casting process, flaw detection ensures no sand holes, increasing pressure-bearing capacity by 20%.

2. Optimized Structural Design

·The gate guide ribs are thickened to reduce shaking during opening and closing, reducing noise to below 65dB.
·Direct connection between the actuator and the valve body, with a transmission efficiency of 95%, shortening the opening and closing time by 15% compared to similar products

Service Support

Customization Services
·Provide full-dimensional customization of materials, diameters, connection standards, and control modules.
·Support explosion-proof certifications (Ex, ATEX, IECEx), and classification society certifications (ABS, DNV, GL).

Quality Assurance
·Each product undergoes a 1.5 times nominal pressure hydrostatic test, airtightness test, and full-stroke opening and closing test before leaving the factory.
·Provide a 18 month warranty (excluding wearing parts) and lifetime maintenance technical support.